Week 9 FYP II

Title of activity:

 The study of computer interface


Objectives:

To develop a PIC program so that can be burned into PIC.


Content/Procedure:  

The above program was build for PIC 16F877A. We use delay to avoid the systems from hang, The delay used is 20mHz. For RS232 setting, the baud was 9600 and we use the pin number 6 to transmit and pin number 7 to receive. 

If the output is high (1), the red LED will turn on

If the output is low (0), the red LED will turn off

The red LED will turn on of the valid card was detected. The valid card is the card that has been registered through the program.

Conclusion:

Can be concluded that this week's revised was based on the PIC program. This is important as PIC is the heart of my project ;)