Title of activity:
Software description
Objective:
To understand more on
software description
Content/Procedure:
1. Now component arrangement and soldering can be started.
Please solder the electronic components one by one according to
overlay label (white color) on PCB surface. Ensure the component value and
polarity is correctly mounted.
2. Connect the RFID reader to 2510-04
connector.
3. The next step is to install MPLAB IDE and HITECC C PRO (operating in Lite mode) into computer.
4. After the installation complete, open the
project file provided using MPLAB IDE.
5. Please modify the tag ID in the program
same as the tag ID that you want to read. This step is to allow the system
to remember the ID.
6. Plug in power supply for the circuit.
User can choose to use battery or AC to DC adaptor.
7. Build the project and load the hex file
into the PIC microcontroller using the USB In Circuit Programmer (UIC00A).
When user build the project, MPLAB IDE will generate hex file. The hex
file generated from MPLAB IDE will be named according to project name, not
C file name. Cytron Technologies also provide hex file for user. Do not
forget to switch ON the power.
Conclusion:
Get to know the step in
attaching the IC to the PCB.
No comments:
Post a Comment