Week 10 FYP I

Title of activity:

Study of the possible output

Objective: 

To ensure the suitable output in order to avoid any wasting by buying wrong equipment

Content/Procedure:

LED as output for PIC microcontroller

One I/O pin is designated for a LED as output of PIC microcontroller. The connection for a LED to I/O pin is shown in Figure 10. The function of R11 is to protect the LED from over current that will burn the LED. When the output is in logic 1, the LED will ON, while when the output is in logic 0, the LED will OFF.

Buzzer as output of PIC microcontroller

When the output is in logic 1, the buzzer will activate (beep), while when the output is in logic 0, the buzzer will deactivate.

Conclusion:

Hence, the equipment needed for possible outcomes is the buzzer and LED.